Rebate versions

STS: flush

Flush-fitting door leaf

The flush-fitting STS version is especially suited for demanding architecture.

When combined with block frames 62/55 or 62/75, this results in a flush transition between the door leaf and frame on both sides.

 

STS
FLUSH

STU: thick rebate

In addition to functional areas, the thick rebate STU version is recommended especially for break-in-resistant doors (RC 2, RC 3).

When combined with double rebate frames, a flush-fitting door appearance is obtained on one side.

 

STU
THICK REBATE

Product versions

Single-leaf doors

Multi-purpose single-leaf doors with fire protection class EI230 and EI290.
The 62 mm door leaf of the STS/STU steel and stainless steel doors is available as a flush or thick rebate version.
The flush and fully bonded composite construction significantly increases leaf rigidity and the doors close with a rich sound.

Double-leaf doors

Multi-purpose double-leaf doors with fire protection class EI230 and EI290.
The 62 mm door leaf of the STS/STU steel and stainless steel doors is available as a flush or thick rebate version.
The flush and fully bonded composite construction significantly increases leaf rigidity and the doors close with a rich sound.

Frame versions made of steel and stainless steel

A large range for individual fitting situations

The Tortec frame system ensures a stable wall connection for optimal and long-lasting door functionality.

Our frame variants

  • Corner frame 40 standard
  • Corner frame individual
  • Block frame 62/55 or 62/75
  • Block frame 95/55 or 95/75
  • Block frame 105/100
  • Profile frame
  • Profile frame, double-shell
  • Double rebate frame (for flush-fitting door appearance with RC 2/RC 3 security doors)
  • Add-on frame (only for multi-purpose doors)
  • Panel wall frame for hall construction
  • Special frames with chamfered edge recess for an individual look

The advantages at a glance

  • Sheet thickness 1.5 mm or 2.0 mm for block frames (62/55 mm and 62/75 mm)
  • optionally with floor recess 30 mm
  • Tortec lining groove (except for block frames 62/55 mm and 62/75 mm)
  • galvanized and powder-coated in Grey white as standard (similar to RAL 9002)
  • optionally in 7 preferred colours, RAL to choose, special NCS colours or in stainless steel
  • quick and easy fitting using fixing brackets incl. steel spacers
  • DryTec frame system, mortar-free fitting for El230 and El290
  • Delivery includes fixing material

3-part frames (standard)

Separated in the mitred area and packaged installation-friendly for simple clamp/screw fitting for solid construction walls and dry construction walls

  • for single-leaf doors as standard
  • for double-leaf doors as standard
  • Stainless steel doors and security doors are not available with 3-part frames
  • Optionally also available as a double-shell version

Double-shell frames (optional)

welded in the mitred area and invisibly separated in the lining groove for renovations and retrofitting

  • for single-leaf doors
  • for double-leaf doors
  • optionally also available as a triple-shell version

1-part frame (optional)

welded in the mitred area and polished for solid construction walls, dry construction walls and fitting in partition walls.

  • optionally for single-leaf doors
  • optionally for double-leaf doors
  • door width up to 2400 mm

DryTec frame system
Fitting without mortar for fire-rated doors

High-quality DryTec frames  are particularly recommended for stainless steel and powder-coated fire-rated doors and for fitting in unplastered brickwork. DryTec frames are backfilled with mineral wool at the factory and can therefore be fitted quickly and cleanly without mortar.

This guarantees clean surfaces with no soiling or damage, and no subsequent painting is required. The gap between brickwork and frame is sealed with acrylic. Larger gaps (> 5 mm) must additionally  be filled with commercially available, fire-proof mineral wool.

 

Corner frame 40 standard

  • no mortice work is required for fitting elements of the frame
  • quicker and cleaner fitting
  • depth 40 mm hinge side, or 60 mm opposite hinge side

Corner frame 20 individual

  • increased clear passage width
  • minimum depth 40 mm hinge side, or 20 mm opposite hinge side
  • other depths possible

 

Block frame 62/55

  • flush on both sides for flush doors (STS)
  • flush wall fitting using optional patented fitting material

Block frame 62/75

  • 60 mm wide frame depth (for 90° openings in hallways)
  • flush on both sides with STS doors
  • flush wall fitting using optional patented fitting material

 

Block frame 95

  • Version with depth 55 mm or 75 mm
  • flush on one side for flush doors (STS)
  • flush wall fitting using optional patented fitting material

Block frame 105/100

  • 85 mm wide frame depth (for 90° openings in hallways)
  • for doors with operator equipment
  • flush on one side for flush doors (STS)
  • flush wall fitting using optional patented fitting material

 

Profile frame

  • Profile widths up to 400 mm
  • Special frames with edge recess for individual appearance
  • with double rebate for improved acoustic insulation (up to 42 dB)

Profile frame, double-shell

  • Profile widths up to 400 mm
  • welded in the mitred area
  • invisibly separated in the lining groove
  • for renovations and retrofitting