The glazing beads are delivered in galvanized steel as standard, matching the door surface finish with powder-coated primer in 7 preferred colours or RAL to choose. On request, beads are also available in brushed stainless steel V2 A, 1.4301 or in a colour different from the door colour.
All ventilation grilles consist of safety sheet metal with an internal perforated steel sheet. They are supplied galvanized and powder-coated in Grey white (similar to RAL 9002), and on request in RAL to choose or in stainless steel (V2A). Optional versions are also available with insect protection fabric, in galvanized steel with mesh size 1.4 mm.
Fully matching system – door and operator from a single source
Tortec automatic hinged doors with operator HDO 200 are universally applicable. With their quiet operation, they doors are particularly suitable for hospitals and offices. These automatic doors are also attractive with their comfortable opening which creates a barrier-free passage. The speed control ensures a constant opening and closing speed. An integrated programming switch can be used to customise the settings. You can operate the automatic door comfortably via a button, a radar/movement detector or by using control elements with BiSecur radio technology.
The perfect solution for every requirement.
With compensator function, smoke sensor control or electromechanical hold-open device – Tortec offers the right overhead door closer with the proper equipment for every door situation. And these products are attractive not only from the point of view of quality, but also comfort and design.
HDC 35
Slide rail door closer for single-leaf doors as standard
TS 4000
Linkage door closer with restrained opening
TS 5000
Slide rail door closer with restrained opening, optionally this door closer can also be supplied with a stainless steel cover
TS 5000 stainless steel
Slide rail door closer with restrained opening made entirely of stainless steel
TS 5000 EC-Line
Slide rail door closer with with optimum passage convenience and a high closing force (accessibility in accordance with DIN 18010 / DIN SPEC 1104)
TS 5000 ISM
Slide rail door closer with integrated door leaf selector for double-leaf doors
TS 5000 E
Slide rail door closer with electromechanical hold-open device
TS 5000 E-FS
Slide rail door closer with compensator function
TS 5000 R
Slide rail door closer with electromagnetic hold-open device and smoke sensor control
TS 5000 R-FS
Slide rail door closer with compensator function and smoke sensor control
TS 5000 E-ISM
Slide rail door closer with electromechanical hold-open device and integrated door leaf selector for double-leaf doors
TS 5000 R-ISM
Slide rail door closer with electromagnetic hold-open device and smoke sensor control and door leaf selector for double-leaf doors
TS 83
Linkage door closer with restrained opening
TS 93
Slide rail door closer with restrained opening
TS 93 GSR
Slide rail door closer with door leaf selector and continuous slide rail
TS 93 EMF / EMR
Slide rail door closer with electromagnetic hold-open device and smoke sensor control
TS 93 GSR EMF2
Slide rail door closer with door leaf selector and electromagnetic hold-open device in both leaves
TS 93 GSR EMR2
Slide rail door closer with door leaf selector and electromagnetic hold-open device in both leaves and smoke sensor control
ITS 96
Integrated slide rail door closer
ITS 96 GSR
Integrated slide rail door closer with door leaf selector
ITS 96 EMF
Integrated slide rail door closer with electromagnetic hold-open device
TS 99 FL
Slide rail door closer with door leaf selector, electromagnetic hold-open device in the fixed leaf and additional compensator function in the traffic leaf
TS 99 FLR
Slide rail door closer with door leaf selector, electromagnetic hold-open device in the fixed leaf, additional compensator function in the traffic leaf and smoke sensor control
To suit your individual requirements
Tortec multi-function doors are available as standard with a black plastic handle with short escutcheon, and prepared for profile cylinder. Optionally, our multi-function doors can be supplied from the factory with high-quality lever handle sets in aluminium or stainless steel.
To fulfil high architectural demands, doors can also be equipped with a selection of flush-fitting round rose escutcheon designer lever handles up to fire protection category T30 / EI230. The rose escutcheon can be surface-mounted or flush-fitting with the door leaf.
FS lever handle set D-110
With sliding bearing made of aluminium or stainless steel
With stainless steel ball bearing
FS lever handle set D-190
With sliding bearing made of stainless steel
FS lever handle set D-210
With sliding bearing made of aluminium or stainless steel
FS lever handle set D-310
With sliding bearing made of aluminium or stainless steel
With stainless steel ball bearing
FS lever handle set D-410
With sliding bearing made of aluminium or stainless steel
With stainless steel ball bearing
FS lever handle set D-490
With stainless steel ball bearing
FS lever handle set D-510
With sliding bearing made of aluminium or stainless steel
With stainless steel ball bearing
FS lever handle set D-330
With sliding bearing made of aluminium or stainless steel
With stainless steel ball bearing
Smoke-tight doors are tested according to DIN EN 1634-3 and must be equipped with the door seal shown on the right and a door closer. Another requirement is that smoke-tight doors have to be equipped with a profile cylinder (a blind cylinder can also be used). The surface edges of the frame must be permanently sealed to both sides of the building structure. Sealing may not be necessary for plastered frames.
Steel and stainless steel doors are optionally equipped with a flush-fitting stainless steel lock plate incl. edge guard. This effectively protects the priming or coating.
Doors prepared for an electric strike come with a lock plate incl. a sample electric strike, which can later be exchanged for an original electric strike. It can be easily connected via a hollow tube in the frame.